Heb jij ervaring in uitdagende technische projecten in goede banen te leiden? Wens je daarnaast te werken bij een snelgroeiend bedrijf in de HVAC-sector? Dan is deze vacature gegarandeerd iets voor jou!

Voor onze klant, regio Kortrijk, gaan wij op zoek naar een Project Manager Meet- en Regeltechniek. Het bedrijf is actief in de HVAC en gebouwtechnieken. De onderneming realiseert uiteenlopende projecten in residentiële, commerciële en industriële contexten en onderscheidt zich door zijn technische knowhow, kwalitatieve afwerking en pragmatische werkwijze.

Omwille van een focus op meet- en regeltechniek gaat onze klant op zoek naar een extra projectleider, om de projecten van A-Z succesvol af te ronden.

Wat houdt de job in?

• Je bent verantwoordelijk om technische uitdagende projecten rond meet- en regeltechniek in goede banen te leiden
• Instaan voor de integratie van verschillende gebouwtechnieken in gebouwbeheersystemen, voornamelijk met betrekking tot HVAC
• Aankopen van het materiaal en de planning van de werken opmaken
• Tijdens de installatiefase ga je regelmatig ter plaatse om de voortgang te bekijken
• Je zorgt ervoor dat de projecten binnen de afgesproken tijd, budget en scope worden afgerond
• Je automatiseert HVAC-systemen en koppelt deze aan het algemeen gebouwbeheersysteem

• Je behaalde bij voorkeur minstens een Bachelorsdiploma Elektromechanica
• Aantoonbare ervaring binnen meet- en regeltechniek/gebouwenautomatisering is een must (als technieker of projectverantwoordelijke)
• Naast het Nederlands spreek je bij voorkeur ook een woordje Engels en Frans

Als Field Service Technieker ben je verantwoordelijk voor het in topconditie houden van sprinklerinstallaties bij klanten verspreid over Vlaanderen. Je speelt een sleutelrol in het oplossen van technische problemen en zorgt ervoor dat de brandbeveiligingssystemen betrouwbaar en veilig blijven werken. Je werkt zelfstandig vanuit huis en gaat dagelijks op pad om onderhoud en reparaties uit te voeren.

Wat zijn je verantwoordelijkheden?

• Je voert zowel preventief onderhoud als herstellingen uit aan sprinklerinstallaties.
• Je inspecteert de installaties op slijtage en gebreken en voert indien nodig direct de nodige reparaties uit.
• Je staat in voor de controle van zowel mechanische als elektrische componenten van de systemen.
• Je geeft klanten uitleg en advies over het correcte gebruik van de systemen en beantwoordt technische vragen.
• Na verloop van tijd word je ingeschakeld in het wachtsysteem voor dringende interventies buiten de kantooruren.

• Je hebt een diploma in een technische richting (mechanica, sanitair, HVAC) of gelijkwaardige ervaring.
• Ervaring met sprinklerinstallaties, brandbeveiliging of HVAC is een groot pluspunt.
• Je werkt zelfstandig en nauwkeurig en hebt een klantgerichte aanpak.
• Je kan storingen snel analyseren en efficiënt oplossen.
• Een goede kennis van het Nederlands is vereist, basiskennis Frans en/of Engels is een voordeel.
• Je beschikt over een rijbewijs B.

Ben jij HVAC minded en heb je zin om planmatig aan de slag te gaan? Dan is dit een mooie optie voor jou! Ga aan de slag als verantwoordelijke van het planningsteam en de dienst na verkoop dat zich specialiseert in HVAC. Je gaat aan de slag in de omgeving van Kortrijk en krijgt een gevarieerd takenpakket incl. een mooi aantrekkelijk loonpakket.

De functie inhoud
Wat staat er jou te wachten als planner binnen de HVAC?

• Beheer en opvolging van dossiers van goedgekeurde offerte tot en met definitieve oplevering.
• Opstellen van installatieplanning en aansturen van installatieploegen.
• Zorgen voor tijdige beschikbaarheid van materialen en onderdelen.
• Fungeren als centraal aanspreekpunt voor klanten, installateurs en interne teams.
• Bieden van technische en praktische ondersteuning na installatie.
• Bewaken van kwaliteit, timing en klanttevredenheid gedurende het hele proces.
• Optreden als technisch expert voor klanten: vertalen van complexe vraagstukken over rendement, hydraulische inregeling en koelcycli naar begrijpbaar advies.
• Ondersteunen van klanten bij het optimaal afstellen van warmtepompen en airco-installaties.

Onze klant
Onze klant is een snelgroeiende Belgische speler in energetische renovaties en energie-efficiënte oplossingen, met hoofdkantoor in Kortrijk en meerdere vestigingen in België. Als totaalpartner begeleiden ze klanten van advies tot installatie, met een sterke focus op duurzaamheid, maatwerk en meetbare resultaten. Als planner kom je terecht in een gedreven organisatie met een jong en ervaren team, waar je alle vrijheid krijgt om nieuwe ideeën, tools en kanalen uit te proberen. Zin om de sprong te maken naar een functie waar ondernemerschap, initiatiefzin en liefde voor planning samenkomen? Dan ben jij misschien wel onze nieuwe planningsverantwoordelijke binnen het HVAC team. Ben jij het profiel die men zoekt?

• Als planningsverantwoordelijke ben je organisatorisch sterk en heb je kennis van HVAC.
• Zelfstandig werken schrikt jou niet af!
• Je bent hands-on en kan zelf tot slimme oplossingen komen.
• Je hebt kennis van warmtepompen en airco's.

Sterke assists gezocht voor onze bouwploeg

Werken bij Artes Group, da’s werken bij de kampioen van de bouw. Dat komt dankzij een sterk team met verschillende talenten, die perfect op elkaar zijn ingespeeld.

Artes is een grote onderneming met een familiaal karakter. Collega’s zijn meer dan gewoon collega’s, het zijn vrienden. We werken samen aan de grootste en uitdagendste werven van ons land. We zijn een sterke speler op alle terreinen: burgerlijke bouwkunde, waterbouw, petrochemie, technieken, prefab, gebouwen en restauratie.

Artes Uptech maakt sinds kort deel uit van de Artes familie. Het installatiebedrijf specialiseert zich in technische installaties voor gebouwen inclusief HVAC, sanitair, elektriciteit en data, en maakt daarmee de Artes Group compleet.

Locatie: Oudenburg, met werven in Oost- en West-Vlaanderen

Jouw speelveld:

Als meet- en regeltechnieker bij Artes Uptech ben je verantwoordelijk voor het installeren en opstarten van de meet- en regeltechnieken van HVAC-installaties en sanitair in gebouwen. Ook volg en optimaliseer je de werking van HVAC- en sanitaire installaties op, samen met je collega van de onderhoudsdienst. Je verhelpt dringende problemen met de meet- en regeltechniek van installaties in uitbating.

De ideale kandidaat kan elektrische schema’s en schakelborden van HVAC- en sanitaire installaties lezen, begrijpen (en eventueel ontwerpen). Je bent verantwoordelijk voor de uitvoering en/of het coördineren van de voorbereidende werken, zoals bijvoorbeeld kabels trekken en borden bouwen. Je hebt ervaring in de automatisering van HVAC-systemen en beschikt over de nodige vaardigheden om hydraulische of luchttechnische installaties te testen en in te regelen. Ook het programmeren van sturingen, kan een onderdeel vormen van je takenpakket. Er is een goede kennis over meet- en regelcomponenten, zoals onder andere voelers installeren.

Flexibiliteit is een cruciale eigenschap, aangezien je incidenteel moet kunnen reageren op storingen, zowel ter plaatse als vanop afstand. Dringende interventies worden door jou uitgevoerd om de storingen te verhelpen.

Jouw toolbox:

• Je bent in het bezit van een diploma secundair onderwijs, hoger beroepsonderwijs, graduaat of bachelor in elektromechanica, elektronica, elektrotechnieken, meet- en regeltechniek
• Aantoonbare ervaring als meet- en regeltechnieker HVAC en/of sanitair is een plus
• Je bent een gemotiveerde en nauwkeurige collega, je denkt probleemoplossend en bent flexibel ingesteld
• Je kan vlot communiceren in het Nederlands of in het Engels, Frans is een troef
• Je werkt resultaatgericht en bent in staat om zowel zelfstandig als in teamverband te functioneren
• Je bent in het bezit van een rijbewijs B

You will be part of High Voltage Products Service in Ludvika. High Voltage Products is business unit within ABB’s Power Grids division. The business unit develop, manufacture and market High Voltage Products for HVAC and HVDC systems, such as Surge Arresters, Circuit Breakers, Instrument Transformers, Capacitors and Cooling systems. You will be part of High Voltage Service, a business unit within the Power Grids division in Ludvika. High Voltage Service has a worldwide ABB responsibility for After Sales and Service of High Voltage Products, with High Voltage Breakers as main driver. The markets are found both in Sweden and in other parts of the world. We have recently relocated to a bigger and more improved facility and are now looking for personnel to join us on our expansion journey. Tasks: As a Sales and Marketing Manager you will be responsible to develop and coach a sales team of 10-15 persons to maximize the support to our customers and growth of the business. Service is working on moving the business from small spare part orders to a more complex business. In your role you will play an important role in this mission. An important task for you will be to simplify the daily work for the team to create more time for customer interaction. You will set clear targets and follow up the individual results and coach the team to achieve even better. You will be part of Service management team and report directly to the Local Product Group Manager. In this role you will have a lot of opportunities to develop both the business and yourself. It is an exciting journey ahead and a great career opportunity for you who are ready for a new challenge. Travelling may occur a couple of times a year. Requirements: You hold a university degree within engineering and have a couple of years of work experience within a relevant field. If you have former leadership experience it is considered a plus. Also, you should be able to work with different personalities and cultures. Knowledge about the Service business and/or electrical equipment is a benefit. Fluency in English is mandatory, written and spoken alike, whereas skills in Swedish are qualifying. Your personality is of high importance. We look for you who are positive with the attitude that everything is possible to do in a team. As a leader you should be coaching and have a flexible mindset. Your ability to set clear targets, follow up and achieve results are other important skills. Lastly, you should also be patience and persistent. Additional information: Are you ready for a new exciting challenge? Does the above description sound like you? Welcome to apply at abb.com/careers. Recruiting Manager Per Holgersson, +46 24 078 38 48, will answer your questions about the position. Union representatives – Sveriges Ingenjörer: Mikael Hjort, +46 240 78 29 86; Unionen: Yvonne Norgren, +46 240 78 36 94; Ledarna: Christer Fridlund, +46 240 78 29 12. All other questions can be directed to Talent Partner Sofia Lindblom, +46 727 04 06 11. Welcome to apply no later than February 1, 2019. ABB strives to have a diverse and inclusive work environment and we welcome female candidates to apply. ABB (ABBN: SIX Swiss Ex) is a pioneering technology leader in power grids, electrification products, industrial automation and robotics and motion, serving customers in utilities, industry and transport & infrastructure globally. Continuing a history of innovation spanning more than 130 years, ABB today is writing the future of industrial digitalization with two clear value propositions: bringing electricity from any power plant to any plug and automating industries from natural resources to finished products. As title partner in ABB Formula E, the fully electric international FIA motorsport class, ABB is pushing the boundaries of e-mobility to contribute to a sustainable future. ABB operates in more than 100 countries with about 147,000 employees. www.abb.com

In order to work in Ireland a non-EEA National, unless they are exempted, must hold a valid employment permit. Please review the Eligibility and requirements for an employment permit if you are unsure of your eligibility to apply for this vacancy.
We are seeking an accomplished and highly proficient Senior Mechanical Estimator to join Glanua, a recognised leader in the water and wastewater sector. This role will be central to the success of our tendering activities across major municipal programmes for Uisce Éireann and AMP8 frameworks with Thames Water, United Utilities and Yorkshire Water. The successful candidate will bring strategic insight, technical depth and the ability to shape competitive, high quality proposals that reflect Glanua’s commitment to excellence. As a senior member of the pre-construction team, you will prepare analytical and accurate estimates for mechanical works, ensuring that all proposals are grounded in strong engineering principles and an appropriate level of commercial risk. You will collaborate closely with our design, project management and procurement teams to develop solutions that are cost effective, buildable and aligned with client performance expectations. You will play a key role in assessing the constructability of designs, selecting suitable materials, identifying opportunities for innovation and ensuring that Glanua positions itself at the forefront of technical and commercial delivery. You will also provide informed and timely pricing guidance during the early stages of tenders, supporting optioneering, budget development and strategic decision making. The role therefore demands a deep understanding of mechanical systems used in water and wastewater treatment, together with a clear appreciation of market trends, supplier capability and emerging technologies. You will ensure that all governance and risk management processes are rigorously followed and fully documented. Your leadership will contribute to the development of tender programmes, staff scheduling, procurement strategies and commercial submissions that reflect Glanua’s high standards of accuracy, integrity and professionalism. This is a pivotal position for a senior professional who can operate confidently under pressure, manage multiple priorities and influence the success of high value, technically complex projects. Main Duties and Responsibilities: Estimate Preparation Design Development Participation Risk and Governance Compliance Tender Preparation Procurement Planning Technical and Industry Awareness Financial Modelling Cost Coding and Feedback

In order to work in Ireland a non-EEA National, unless they are exempted, must hold a valid employment permit. Please review the Eligibility and requirements for an employment permit if you are unsure of your eligibility to apply for this vacancy.
Role: Mechanical Site Fitter Location Base: Covering our Projects throughout Munster Salary: Competitive. Main Duties and Responsibilities: The main duties and responsibilities of the Site Mechanical Fitter are outlined as follows: Work as part of a team in the delivery of one or more projects at any one time, embracing the ethos of a “one team” culture. Ensure Health, Safety and Environmental standards, policies and procedures are always adhered to. Review of design stage mechanical drawings and P&ID in order to validate designs, familiarise with project and spot issues before they arise. Site install of mechanical systems, pipework and equipment including supporting brackets and stands. Pipework and valve installations may range from DN4mm to DN2000mm in PVC, DI, PE or SS. Modification, fabrication and installation of mechanical systems. Complete system testing in the form of pipework pressure tests and completion of inspection test records (ITRs) on completion of installation. Maintenance and repair of existing water / wastewater treatment equipment including strip-down, part replacement and re-building. Troubleshoot equipment and instrumentation, strip-down and repair equipment as necessary to ensure good working order. Conduct periodic inspections and preventative maintenance on system installations. Organise and facilitate plant shutdowns and/or diversion of flows as required with project delivery team and the customer through permit-to-work systems. Ensuring all works are to the company and mechanical standards. Complete Health & Safety checks and permits as required for work activities being undertaken. Ensure a positive experience for the customer and their representatives instilling an ethos of professionalism, collaboration and co-operation. Seek to improve the mechanical installation process by providing lessons learned feedback and innovative solutions for adoption on future projects. Keep appraised of the latest standards and technology through continuous professional development (CPD). Show an eagerness to learn and progress in your own career as well as the mentoring and training of more junior staff. Glanua has a proven track record of developing staff and promoting from within the organisation. Other duties as required from time to time. Knowledge, Skills and Experience: The main knowledge, skills and experience required of the Site Mechanical Fitter are outlined as follows: Minimum of 2 years’ experience working in a similar role, preferably in the water and wastewater industry. Trade Qualified Mechanical Fitter/Fabricator, Maintenance Mechanical Fitter. Experienced in the mechanical installation of equipment, systems and pipework (including Stainless Steel, PVC, PE, and Ductile Iron). Good working knowledge of mechanical systems including strip-down repair and re-building. An interest in developing a career within an industry-leading organisation.

Mechanical Engineer – Industrial Machinery (all levels, m/w/d) About The Role ZEEN Tech AG is a Swiss startup revolutionizing the food industry with our next\-generation, water\-based frying and drying technology, which we export worldwide. As we grow rapidly, we're looking for passionate individuals to join us. We are looking for several additional Mechanical Engineers to add to our mechanical design team. Whether you are early in your career or a seasoned engineer, you will work hand\-in\-hand with our Lead Engineer and the rest of the technical team to translate process requirements and thermal challenges into a robust, food\-safe machine. Key Responsibilities Machine Design \& Execution:Contribute to refining and building out the detailed 3D CAD designs for production, with scope and autonomy matched to your experience. Thermal \& Structural Engineering:Support and learn to manage the complex mechanical realities of extreme heat, thermal expansion, structural integrity, and high\-efficiency insulation concepts. Supplier Integration: Work closely with the Lead Engineer to integrate technical specifications and CAD models from external suppliers (e.g., high\-temperature centrifugal fans and continuous industrial conveyor belts) into the main machine assembly. Design for Manufacturing (DFM): Help create clean, well\-organized CAD assemblies and precise manufacturing drawings, ensuring that parts can be fabricated and assembled accurately the first time and minimizing on\-the\-fly workshop modifications. Hygienic Design: Help ensure the machine structure complies with food industry standards (e.g., EHEDG guidelines), focusing on cleanability, drainage, and food\-safe material selection (stainless steel, specialized plastics/seals). Cross\-Functional Collaboration: Work in collaboration with the Engineers and the assembly team to ensure seamless integration of drives, sensors, airflow systems, and cabling pathways. Requirements \& Qualifications Education: BSc or MSc in Mechanical Engineering or Process Engineering. Experience: Some relevant experience designing industrial machinery, process equipment, or thermal machines (ovens, kilns, food\-processing lines) – we welcome applications across all levels, from motivated junior engineers to seasoned specialists. Core Skills:\- Working knowledge of 3D CAD software (SolidWorks), whether gained through studies, an internship, or professional experience. \- A solid foundation in sheet metal design, welding configurations, and mechanical drive systems, with the depth growing with your level of experience. \- Understanding of thermodynamics and fluid routing (steam containment, airflow,…). Mindset: You are highly structured, detail\-oriented, and a true team player. You take pride in precision and clear communication. Languages: German and good command of English (or vice versa). Nice to Have Experience with fluid dynamics simulation (CFD) to optimize steam and airflow inside the cooking chamber. Specific background in the food processing equipment sector. How to apply Submit your application to and ensure you attach the following documents as PDFs: Updated CV / Resume: Detailing your relevant work history and skills Cover Letter Certifications \& Degrees jpidec4f36cjm jit0626jm jiy26jm

In order to work in Ireland a non-EEA National, unless they are exempted, must hold a valid employment permit. Please review the Eligibility and requirements for an employment permit if you are unsure of your eligibility to apply for this vacancy.
The main duties and responsibilities of the Mechanical Site Foreperson are outlined as follows: Work as part of a team in the delivery of one or more projects at any one time, embracing the ethos of a “one team” culture. Supervise and coordinate all mechanical works on-site including pipework installation, mechanical equipment installation, testing and commissioning activities. Ensure Health, Safety, Environmental & Sustainability standards, policies and procedures are always adhered to on-site. Be familiar with the HSQE management systems and procedures in conjunction with the current statutory requirements. Be available and willing to provide coverage should the Project Manager be absent for any reason, assuming responsibility for the day-to-day operation of the site. Monitor mechanical progress against programme and budgets, understanding the impact any overruns may have on the project. Have input into the development of RAMS and completion of safety paperwork including statutory and company safety inspections. Understand the requirements in relation to project design, mechanical specifications and client requirements. Coordinate subcontractors, suppliers and direct labour to ensure works are completed safely, efficiently and to a high standard. Ensure all mechanical works are completed to specification, avoiding reworks and identifying and rectifying defects in a timely manner. Participate in site safety inspections performed by both internal and external parties and assist in closing out any identified actions. Liaise with clients, consultants and site management teams to ensure successful project delivery and maintain positive working relationships. Ensure a positive experience for the client and their representatives, instilling an ethos of collaboration, co-operation and respect. Other duties as required from time to time. Knowledge, Skills & Experinece: The main knowledge, skills and experience required of the Mechanical Site Foreman role are outlined as follows: Fully qualifed mechanical craftsperson or plumber with relevatn certifications. Proven experience in a similar mechanical foreman or supervisory role within the water, utilities, industrial or construction sector. Strong mechanical background with experience in pipework, pumps, treatment equipment, mechanical installations and commissioning activities. At least 5 years experience in mechanical installation with at least 2 years in a supervisory or foreman role. Experience working on Pharma sites Ability to read and interpret mechanical drawings, P&IDs and technical specifications. Manual Handling and Safe Pass required. Basic understanding of health and safety standards and the ability to embrace the safety ethos of the organisation. Strong leadership, organisational and problem-solving skills with the ability to work on your own initiative. Ability to coordinate subcontractors, direct labour and mechanical installation teams effectively.

Job Description Our client is seeking a highly skilled Senior Mechanical Design Engineer to support advanced chassis development projects within the defense sector. This opportunity offers involvement in the design, development, verification, and continuous enhancement of specialized vehicle platforms operating in a technically demanding environment. The successful candidate will contribute throughout the complete product lifecycle, from concept generation and requirements analysis to engineering modifications, prototype coordination, verification activities, and maintenance of technical specifications. The role requires close collaboration with multidisciplinary teams to ensure successful project delivery and product performance. Key Responsibilities Design and develop chassis-related solutions for specialized defense vehicle applications. Lead and coordinate Engineering Change Orders (ECOs), ensuring design modifications are implemented efficiently and accurately. Analyze technical requirements and participate in the development of innovative engineering concepts. Generate, maintain, and update engineering drawings, models, and supporting technical documentation. Coordinate prototype manufacturing requests and assist in validating design performance through verification activities. Participate in project reviews and technical meetings to monitor milestones, align project objectives, and support delivery targets. Investigate technical deviations, customer-reported issues, and test findings, driving root cause analysis and corrective action initiatives. Provide technical guidance in troubleshooting, deviation management, and engineering problem-solving activities. Review and update defense-specific technical specifications to reflect regulatory changes, platform updates, and product improvements. Work closely with design, testing, and project management teams to ensure seamless execution of development programs. Support continuous product enhancement initiatives and contribute to ongoing development projects. Required Qualifications Degree in Mechanical Engineering, Vehicle Engineering, or a related engineering discipline. Strong background in vehicle or chassis development environments. Mandatory experience working with Scania product development. Demonstrated expertise in design engineering and product development processes. Experience handling technical requirements, concept development, and engineering change management activities. Ability to work independently while maintaining effective collaboration across multiple functions. Strong analytical thinking, troubleshooting, and problem-solving capabilities. Experience contributing to complex technical development projects. Technical Tools & Systems Experience with the following tools and platforms is required: CATIA V5 ENOVIA 3DEXPERIENCE OAS KS PHRASE Preferred Qualifications Previous experience within defense-related vehicle development programs. Fluent Swedish language skills. C Driver's License. Practical knowledge of vehicle chassis systems, including engines, driveline components, axles, frame structures, pneumatic systems, and associated hardware. Hands-on experience working with vehicles, prototypes, testing activities, or workshop environments. Additional Information Location: Södertälje / Stockholm, Sweden Seniority Level: Senior Work Location Requirement: All work must be performed within Sweden. Working Language: English. Education Required Bachelor's or Master's Degree in Mechanical Engineering, Vehicle Engineering, or a related technical discipline. Equivalent technical qualifications with relevant industry experience may also be considered. Driving License Required C Driver's License is considered an advantage. Language Requirement English – Proficient (Working Language) Swedish – Preferred Required Skills Chassis Development Vehicle Product Development Design Engineering Engineering Change Management (ECO) Requirements Analysis & Concept Development CATIA V5 3DEXPERIENCE ENOVIA OAS KS PHRASE Technical Documentation Verification & Validation Activities Root Cause Analysis Problem Solving Preferred Skills Defense Vehicle Development Vehicle Chassis Systems Engine and Driveline Components Axles and Frame Structures Pneumatic Systems Prototype Development and Testing Workshop and Hands-on Vehicle Experience Application Method: Interested candidates can apply by sending their profile to hr@semiconservicenordic.com